How to make scarecrow arkham asylum costume

28.12.2020 By Aradal

how to make scarecrow arkham asylum costume

Arkham Asylum: Scarecrow Costume

Needle Hand (Image 1) Take your syringes and use the tip of your hot glue gun to poke holes at the very bottom of each. Attach your aquarium tubing inside the hole with hot glue. Put on the glove itself and glue each syringe onto your finger tip. Arkham Asylum: Scarecrow Costume. by Mickey B. I wanted to try my hand a creating a decent Scarecrow from the Batman Arkham Asylum games. I started with stripping the leather from 3 different leather couches. I wanted to keep the build as low cost as possible.

We wanted the practicality of wearing street clothes, but with some key aspects of scarecrow flair. Pic A. Attach the blade to the handle by putting a piece of pvc in between a T pvc adapter and a L curved pvc adapter. Vials Fear toxin- take two different colored highlighters apart and get the tube inside that contains the dye. Take the dye tube and mix it with some water, causing the water to become the color of the highlighter. From there, pour each mixture in a separate tube.

I took some hot glue and what do spring isolators do mine shut. Image 1 -take your outlet socket cover and bend it length wise so that it will curve around your wrist. Needle Hand Image 1 Take your syringes and use the tip of your hot glue gun to poke holes at the very bottom of each.

Attach your aquarium tubing inside the hole with hot glue. Put on the glove itself and glue each syringe onto your finger tip. Use some tape and secure each aquarium tube around your finger. Lastly, cut your twisty ties into about 3 inches long and hot glue them to the ends of the syringes.

Mask Image 1 For the dickie, cut a piece of brown cloth so that it will cover your chest area. The mask does not need to be perfectly symmetrical, as it adds to the character. Then sew one end of how to create an action button in powerpoint 2007. PIC J. Cut out two eye holes, and then start making it look weathered. I used a cheese grader and continually scrubbed the mask AND the dickie to give them a kind of torn, old look.

Take your various brown threads and sew it on the mask in various way. The more different textures and colors of dark thread, the creepier it should look.

Image 3 put the mask on, then the dickie, and then the noose to accent your neck. Sew a cone with the dark brown fabric pic L and glue it onto the rim. Lastly, take some rope from your noose and wrap it a few times around the base of the cone pic M. If you would like to check out more current art projects outside of Instructables, check out Spicy Panda Creations on Facebook.

The eyes lit up orange as well. I made it how to setup netflix on samsung led tv from pretty much scrap. I was going to do an 'ible on it, but I did not take enough pictures. Reply 7 years ago on Introduction. Here is a similar costume I did for Halloween last year. You would scare the tar out of me if I saw you in this costume! LOVE the fear-gas fingers, great out of the box thinking on how to make needles!

I think so! We were just not accessible to those materials, but go for it. My only concern is that maybe the burlap might be itchy? But that would be a preference call. More by the author:. About: I'm a kid in a candy store when it comes to creating things. I love learning different versions of art, whatever medium it may be.

Put it all together, and you got a scarecrow costume. Now go scare some kids. Did you make this project? Share it with us! I Made It! Light Up Plaque by kaitlyn. Kid Name Circle Board by julien. Reply Upvote. I am doing the sinestro corps scarecrow from ur other project and what exact fabric did u use. SpicyPandaCreations desertsniper Reply 7 years ago how to make scarecrow arkham asylum costume How to finance a home addition. Dajab 7 years ago.

Ok thank you for this great tutorial, not a lot of people show how to make the fear-gas fingers. Could we instead make the mask out of burlap and twine for a more stereotypical look?

Want to add to the discussion?

Sep 13, - This is a tutorial on how I made my Scarecrow mask from the video game Batman: Arkham Asylum. Despite the time it took to make, the project was relatively e. Dec 2, - This is a tutorial on how I made my Scarecrow mask from the video game Batman: Arkham Asylum. Despite the time it took to make, the project was relatively e. Sep 23, - Batman: Arkham Asylym Scarecrow: I wanted to make a Scarecrow costume from the Batman: Arkham Asylum video game series.

I started out molding my basic shape with the model magic. I have a plaster casting of my face and head so this was really easy to lay out.

This process takes just a little bit of time, but 24 hours is the suggested wait time for the model magic to dry. Once Dry, I removed the model magic from the face mold. Some parts I had made too thin, and began to crumble away. Because of this, I chose to separate the lower jaw and work the mask in two pieces. To get the "burlap" look without the itchy and hard to work with burlap, I took pieces of cotton bandages which I cut and ripped into smaller more manageable pieces.

I mixed equal parts white glue and burnt umber brown acrylic paint. Don't worry about getting your bandage patches to look perfect. Right now you just want to get them laid down.

I mixed different batches of brown paint for this step to break up the uniformity and give it some depth. Once you have your several coated layers I think mine had 8 you can trim out the eye holes, and around the face. At this point I attached the two parts upper face and lower jaw to a cotton hood think a ninja mask with hot glue into the correct position of your face.

When laying down last layer of bandages, decide where you want to have the stitching go. I glued down two edge pieces of bandage with a few cm gap in between to give that "sewn together" look.

Paint in between the edges a bit darker to show some depth. Do this before completing the stiches. To actually sew the twine stiches, I had to hand pull each stich through with a crochet hook and knot it on the inside.

This is the worst part of building this costume, but it's also one of the best details so take your time with it. The teeth are made from thermal plastic pellets. For the respirator, I just used two small screw together tins, and bolted them to the lower jaw. Because this is supposed to be a Patchwork costume, there's not much of a pattern a lot of the measurements were just eyeballed.

I started by stripping all the leather from an old couch somebody in my building was getting rid of. I used the softer seat cushion material for the hood and the sleeves, and the more firm side and back panels for the pants.

To make the hood, I cut apart an old hoodie that I had and made it into a template. From that I cut the softer leather to match, and stitched it back up the same way.

The trick here is to go back over your machine stiches with the twine to hid some of the seams. The pants were another monster To make the pants, I ripped the stitching from the old jogging pants I had and laid them on the floor in two flat panels. I then laid out enough leather to cover the pants. I used an exacto knife to carve out pieces, Be careful here as you pretty much have to put them all back together like a big puzzle.

I used spray glue to try and hold the leather pieces in place on the pants.. It didn't work so well. Once I had the pieces all cut out, I taped them to each other with a piece of making tape. The pants had roughly 50 seams per leg. Each seam was stitched to the pants, and the piece next to it with a "zig-zag" stich.

Once I got one full leg done, I repeated the same process on the other leg and then stitched them up the center crotch line. Then more fun twine stitching. This process was painful and time consuming. Because I was using real leather, I had to hand pull each stich through the tough leather with a pair of needle nose pliers.

There's over stiches in total so this process was a nightmare. The arms were really easy, they were just scrap pieces I measured to my arm, and sewed up like a tube.

Okay, this part was actually easier then it looks. I started with the center tube. I cut the 3 inch plumbing tube down to about 7 inches long this will depend on the lengthof your arm.

I capped each end of the tube with some plumbing couplers. I cut the 1 inch pipe down to about 6 inches long, and repeated to make three smaller tubes in total. Next I had to cut the "windows" in each of the three tubes. For this I use a cutting blade in my dremmel tool. Once dry, I slid the vinyl tubing into the 1 inch pipe and cut it off to fit.

I sealed one end of each with a rubber stopper and some contact cement. Each of the small tubes gets capped with one of the chair leg ends also painted silver. I drilled a hole into one end of the caps and fitted the small flashlight into the hole, and the other end the light will fit into the vinyl tube after filling the tube.

The cap in the other end of the tube gets a hold drilled in it to fit the pipe fitting. Two of the tubes have one fitting, and the other has 2 you'll have to measure this out carefully to allow room for both fittings. Once you have all the pieces ready to assemble, lightly rub the tubes with the black ink. Be careful with this, as it can be messy. I heavily coated the parts that would show the "patina" and the rubbed most of the ink off again. This is just to give it a more realistic metal feeling and make it not so "shiny and New" looking.

Once you have the three tubes completed. Then drill holes and secure in place with the nuts and bolts. To make the needle fingers, I used 4 Pee-dee syringes that I picked up at the pharmacy. I also painted the tops and bottoms of the syringes to look like old "harpoon syringes" for the needles themselves I just painted Kabob skewers. The "filling" to the needles and the three chambers on the arm is made of hand sanitizer mixed with orange printing ink" I've been told that orange hair gel works similarly, but I was using what I had.

Fill the needle tips to the desired fullness. To plug the fingers, I used hot glue and two pairs of heavy nitrol gloves. I filled the holes with glue, and then pressed my fingers into them yes it was still hot, but the gloves helped me from getting burned. When I pulled my fingers out, they were perfectly shaped to my fingertips.

I also filled the chambers on the arm with the same mixture, but then stopped the other end by inserting the small flashlight and hot gluing it into the chamber. The four fishtank tubes were filled with the same orange ink, and stopped at both ends with hot glue. I then plugged one end off the 4 into each of the pipe fittings on the chambers. I made a noose for the costume for a neck accessory by just trying a hangmans knot in a the itchy twine rope. I cut this off to make the right length for my neck and used the rest to make a belt for the loin cloth.

The loin cloth is just some scrap leather I had that I cut and stitched belt loops into. Be careful when cutting your leather. One wrong move and I ended up with a few extra stiches then I was planning. Second Prize in the Superheroes and Supervillains Contest. Question 3 months ago.

Reply 2 months ago. More cuts on myself. Between gouging my arm, and sticking myself with the needle when sewing. Question 2 years ago.

Amazing job! Thank you for taking the time to post this. I have one question. For the Fear injector glove.. I'm actually trying to make a short film with some friends and you just saved the freakin day!!! Also my friend has been trying to figure out fake teeth for her halloween cupcakes for a while so you saved the day twice!

Sweet costume! Thanks for documenting your process so carefully, after such a huge effort with the scrap leather! Terrific mask! Love the texture and depth up there. I really need to find a way to get a cast of my head to make masks easier I've never played the game, so I'm not as familiar with the body pieces.

Do you think in the future you might dirty up the brown leather pieces to get the same creep-factor the mask and hood have? Just an idea. I've used sandpaper to scuff and dyes to darken to take the "newness" away from leather. No sharp tools involved, so your arm will be safe! Reply 6 years ago on Introduction.